IR brand IRFP3306PBF special treatment original imported absolutely original

Imported spot passive patch crystal oscillator 3225 2520 16.000MHZ

The outer diameter of the probe domestically produced P02-T chisel head nickel-plated needle is 0.68mm. The total length of the needle is 24

KT2520K26000DCW28QAS import spot

When the "Cross Reference" function of a Step7 project file is not available, the following error message may appear:
- Unable to generate cross reference data
- Some components of Step7 cannot be opened
- Internal data structure failure/discontinuity can solve the above problems in two ways:

plan 1:
Open the failed project file in Step 7, as shown in Figure 1 below:

Figure 1: Opening a failed project file

The project is reorganized via the menu "File->Reorganize" as shown in Figure 2 below:

Figure 2: Reorganizing a failed project

Click "OK" as shown in Figure 3 below:

Figure 3: Confirmation of project reorganization

The failed project files will be reorganized and have a reorganization success message prompt, as shown in Figure 4 below:

Figure 4: Reorganization success prompt box

Scenario 2:
Open the failed project file and save the project as a new project file via the menu "File->Save as..", as shown in Figure 5 below:

Figure 5: Save the failed project as a new project file

Check the box with "With reorganization (slow)". Note that this check will check all errors in the failed project and reorganize them, as shown in Figure 6 below:

Figure 6: Tick option when saving a failed project as

Set the project name and make a storage path. Clicking "OK" will check all errors of the failed project and restore its original internal structure.