First, the bedroom should generally be 7 routes: including power lines, lighting lines, air conditioning lines, TV feeders, telephone lines, computer lines, alarm lines.

The end of each line of the bedroom wants to stay: the top of the bedside table wants to leave the power line port, and the 5-hole plug-in board is suitable for switching, which can reduce the trouble of the bedside lamp without switching, and should also leave the telephone line port, if the double head cabinet, You should leave the power supply and telephone line on the top of the two bedside tables. The power supply wiring port should be left above the dressing table. In addition, consider that there should be reflected light above the vanity mirror, and a switch should be installed next to the wire box. A power cord, TV feeder, computer cable, and telephone line interface should be installed above the desk or computer desk. The lighting should be a single headlight or a ceiling light. The multi-headlight should be equipped with a sub-controller. The focus is on the switch. It is recommended to use a dual-control switch.

Second, corridors, corridors should be 2 routes: including power lines, lighting lines. The power terminal interface needs to stay 1 or 2. The lighting should be based on the length and area of ​​the corridor. If it is wide, the ceiling light and wall light can be installed. If it is narrow, only the ceiling light or the light glass roof can be installed, and the switch should be installed inside the outdoor.

Third, the kitchen should be 2 routes: including power lines and lighting lines.

The power cord part is especially important, it is best to use 4mm2 line, because with the renovation of kitchen equipment, the current use of such as microwave ovens, range hoods, dishwashers, disinfection cabinets, food processing machines, electric ovens, refrigerators and other equipment increased, so Should be in accordance with customer requirements in different parts of the power interface, and a little surplus, in order to use the kitchen equipment added in the future.

Fourth, the restaurant should be 3 routes: including power lines, lighting lines, air conditioning lines.

The power cord should try to leave 2 to 3 power wiring ports. It is best to use a warm light source for the lighting, and the switch is selected inside the door. Air conditioners also need to be interfaced according to professional requirements.

Fifth, the bathroom should be 3 lines: power line, lighting line, telephone line. The power cable should be 4mm2 cable. Consider high-current equipment such as electric water heaters and electric heaters. The power line interface should be installed in a place that is not easily immersed in water, such as on the upper side of the electric water heater or on the upper side of the ceiling. Electric heaters, currently optimistic about the Yuba, can solve lighting, heating, exhausting and other issues, Yuba switch should be placed indoors.

Sixth, the living room wiring should generally be 8 routes: including power line (2.5mm2 copper wire) lighting line (2.5mm2 copper wire), air conditioning line (4mm2 copper wire), TV line (feeder), telephone line (4 core protection) Set of lines), computer line (5 types of double-legged lines), intercom or doorbell line (optional 4-core sheathed line, spare 2 cores), alarm line (referring to smoke, infrared alarm line, 8-core sheath) line).

The line terminals in the living room want to stay distributed: in the top of the TV cabinet, you want to leave the power (5-hole panel), TV, computer line terminal. Air-conditioning line terminals should be reserved for the air-conditioning line (16A panel) and lighting line switch according to the location determined by the air-conditioning professional installer. For single or ceiling lamps, single switch can be used; for multi-head chandeliers, a light sub-controller can be installed on the chandelier to adjust the brightness as needed. At the edge of the sofa, you want to leave the telephone line. On the inside of the door, you want to leave the intercom or doorbell line. At the top you want to leave the alarm line.

It can be seen that the wiring of the wires in different rooms is different, so it is necessary to pay attention to the installation of wires according to the living room during the decoration.