1. Simply enter any address in the IP segment to access the Internet; 2. You can only enter a specific IP address to access the Internet. 1. In the router settings, set the disable dhcp server. When "DHCP Server" is enabled, each device connected to this router will automatically obtain an IP address and will not collide with other computers to achieve Internet access. If the dhcp server is disabled, the router will not actively assign an IP address to the device connected to the router, and the device will not be able to access the Internet. Only manually set the correct IP (do not conflict with the IP of other devices) and the gateway to access the Internet. 2. Set the ARP binding in the router. 1. Open the computer system settings and find the "Network and Internet" option. 2. Click on the "Network and Internet" option and find "Network and Sharing Center". 3. Find "Change Adapter Settings" in the window that opens. 4. Right-click on "Local Area Connection" and find the "Properties" option. 5. Locate the "Internet Protocol Version (TCP/IPv4)" option in the "Properties" window. 6. Double-click the "Internet Protocol Version (TCP/IPv4) Properties" option, click "Use the following IP address", enter the IP address and subnet mask, enter the default gateway address in the default gateway input box, click "OK" to complete the setting. .
45x45mm Low Profile White Faceplate
included or excluded keystones for Keystones, or designed with PC board
fixtures and fittings provided
for Solid Cat 5 or Cat 6 cable
size is 45x45mm basing on Frenc type standard
Material as ABS, PC, PBT in UL94V-0 standards
Operation temperture -40~70 ℃
Could accept any combination of UONICRE Keystone Jack or RJ45 connectors
France Face plate,brush faceplate,France type face plate,network wall plate NINGBO UONICORE ELECTRONICS CO., LTD , https://www.uniconmelectronics.com
How to set up the gateway to access the Internet
The situation can be divided into two types: