Automatic 433 Mhz built-in Waterproof Transmitter and receiver for roller shutter door and window

Aerospace Cable Assembly

The plug of the aerospace Cable Assembly is divided into male and female. The specific identification method is as follows:
1. One side of the plug (the protruding Connector) is a male head, and one side of the jack (the concave connector) is a female head.
2. Distinguish from the appearance and shape, the pointed part of the head is generally a male terminal, and the head with a round hole is generally a female terminal.
3. It can be distinguished by size: generally the larger head is the female head, and the smaller head is the male head.

How to wire the aerospace cable assembly plug?
1. In general, there will be a semi-circular splint at the back of the conventional aviation plug to fix the lead, and there will also be two small turnbuckles on it. You can use a tool to remove the nut and then separate the deck.
2. After removing the aviation plug splint, find a thin nail as a tool and put it into the jack to fix it, and rotate the aviation plug in the opposite direction on one side, so that the core and wire of the aviation plug can be naturally pulled out from the front.
What are the test contents for aerospace cable assembly?
When conducting aviation wiring harness testing, we mainly conduct the following wiring harness tests:
1. On-off test
2. Withstand voltage test
3. Insulation resistance test
4. Two-wire/four-wire resistance test
5. Instantaneous interruption test

Radiation-resistant film-wrapped insulated wire for aerospace: suitable for aerospace vehicles. The wire is irradiable and can be used in an environment where radiation such as current market rays exists.
Tinned copper core PFEP insulated wire and cable: It is mainly used in aircrafts, aircrafts or installation wires used in harsh environments such as high temperature and strong corrosion. It has good high temperature and corrosion resistance characteristics.
Aeronautical radiation-resistant low-temperature flexible wire: It is wrapped with special composite film for insulation, woven with synthetic fibers, and treated with special paint. The wire can still maintain good flexibility and electrical insulation performance after being tested at -196 ℃ dynamic bending, high and low temperature impact, and irradiation.

We cooperate with all leading cable and connector manufacturers, and have a wide range of professional equipment, allowing us to provide quality wiring harness and cable assembly, quick delivery time and favorable prices!

In addition to Aerospace Cable Assembly, we also have Vehicle cable assembly and Industrial Cable Assembly.

Welcome companies from all over the world to contact us. We will serve you with the greatest enthusiasm and become your Chinese partner.

Aerospace Cable Assembly,Military Aerospace Cable Assembly,Aerospace Military Wire Harness,Aerospace Wire Harnesses

Kable-X Technology (Suzhou) Co., Ltd , https://www.kable-x-tech.com