As the competition in the domestic pharmaceutical industry continues to increase, the level of pharmaceutical technology and hardware requirements are becoming higher and higher. It is also very important for the small parts of pharmaceutical clean rooms. It is often the small accessories that affect the risk of the entire purification plant. Overall appearance. Among them, the installation of differential pressure gauges is very particular. Traditionally, the differential pressure gauge is directly hung on the wall, or a hole slightly larger than the differential pressure gauge is dug directly on the color steel plate, and the table is directly embedded therein. On the other hand, a leather tube protrudes from the opposite side and is surrounded by simple glass glue. It is undeniable that such an approach is simple, but it has the following problems: First, there is maintenance risk, and the future calibration of differential pressure gauges must be taken out. At this time, the debris in the wallboard (the rock wool board is more serious ) will be brought out at random, this will inevitably bring risks to the clean room. Second, the surface is uneven and difficult to clean. Third, it is not beautiful, affecting the aesthetics of the entire clean room; the overall installation is ugly, especially the negative pressure tube directly out.

Tianjin Kaishida Instrument Co., Ltd. grand company launched Kashida boutique K2000 differential pressure gauge mounting plate (also called the installation panel, installation box, mounting bracket), directly against the previous differential pressure gauge installation, routine maintenance and ordinary installation method of cleanliness The trouble caused by the detection is designed. It is stamped and formed by a stainless steel mold. It is specially tailored for the installation of differential pressure gauges. The bottom box is pre-embedded into the color steel plate wall. Then the stainless steel sleeve is placed on the differential pressure table and the table is placed in the box. , The reverse side can be screwed on the negative pressure stainless steel finished parts can be completely flat and beautiful.

Features:

1. Fast installation

The differential pressure gauge can be directly fixed on the mounting panel. The opening of the wall can be installed through the differential pressure gauge without screws and without hose connection, which is very suitable for the reform of the purification plant and the cleanroom of the pharmaceutical plant.

2. Strong and durable

The panel is stamped and formed with a 304 stainless steel mold. It is specifically tailored to match the installation of differential pressure gauges. The stainless steel panel is durable and does not change shape during use.

3. Flexible processing

The stainless steel panel surface is elegantly treated, taking into account the surface finish, as well as the coloring of the wall, which is flexible and economical.

4. Easy to maintain

Routine maintenance is only required to remove the pressure gauge mounting screws without affecting any fixed plugging devices.

5. Ingenious design

There is a concealed front pressure hole design on the panel, no need to re-install the negative pressure pressure hole, the panel has a fixed negative pressure hose connector, convenient and compact.

6. Beautiful connection

The stainless steel installation panel has a good molding surface and is tightly sealed with the wall joints. It can be directly sealed and does not need to be glued and sealed. It is flat and beautiful.

K2000 Differential Pressure Gauge Mounting Plate/Box/Panel Recommended Kistler K2000 Series Differential Pressure Gauge.

[attach] differential pressure gauge commonly used scale

0 ~ 60 Pa

0 ~ 1 KPa

0 ~ 5 KPa

-60~0~60 Pa

0 ~ 125 Pa

0 ~ 1.5KPa

0 ~ 8 KPa

-125~0~125 Pa

0 ~ 250 Pa

0 ~ 2 KPa

0 ~ 10 KPa

-250~0~250 Pa

0 ~ 500 Pa

0 ~ 2.5KPa

0 ~ 15 KPa

-500~0~500 Pa

0 ~ 750 Pa

0 ~ 3 KPa

0 ~ 25 KPa

-1000~0~1000 Pa