ZGAR AZ MC Disposable
ZGAR electronic cigarette uses high-tech R&D, food grade disposable pod device and high-quality raw material. All package designs are Original IP. Our designer team is from Hong Kong. We have very high requirements for product quality, flavors taste and packaging design. The E-liquid is imported, materials are food grade, and assembly plant is medical-grade dust-free workshops.
Our products include disposable e-cigarettes, rechargeable e-cigarettes, rechargreable disposable vape pen, and various of flavors of cigarette cartridges. From 600puffs to 5000puffs, ZGAR bar Disposable offer high-tech R&D, E-cigarette improves battery capacity, We offer various of flavors and support customization. And printing designs can be customized. We have our own professional team and competitive quotations for any OEM or ODM works.
We supply OEM rechargeable disposable vape pen,OEM disposable electronic cigarette,ODM disposable vape pen,ODM disposable electronic cigarette,OEM/ODM vape pen e-cigarette,OEM/ODM atomizer device.
ZGAR AZ MC Vape,ZGAR AZ MC Vape disposable electronic cigarette,ZGAR AZ MC vape pen atomizer ,AZ MC E-cig,AZ CC Vape disposable e-cigarette ZGAR INTERNATIONAL(HK)CO., LIMITED , https://www.zgarette.com
This standard is managed by the Ministry of Construction. The specific explanation and other work is the responsibility of the China Academy of Building Research. The publication is organized by the Institute of Standards and Ratings of the Ministry of Construction.
The Ministry of Construction of the People's Republic of China compiled on May 18, 1990. This standard is based on the requirements of the State Planning Commission [1984]] No. 305, and is edited by the China Academy of Building Research, and is related to the design, research and higher education institutes. Schools and other units have been compiled together.
In the preparation process of this standard, the preparation team conducted extensive investigation and research, and carefully summarized the practical experience of China's civil architectural lighting design. With reference to relevant international standards and foreign advanced standards, scientific research and experimental verification were carried out for major technical problems. Work, and extensively solicited opinions from relevant units across the country. Finally, the Ministry of Construction will review the final draft with relevant departments.
In view of the initial preparation of this standard, in the implementation process, it is hoped that all units will combine engineering practice and scientific research, earnestly sum up experience, pay attention to accumulating information, and if it finds that it needs to be revised and supplemented, please send comments and relevant materials to China Building Science. The Institute of Building Physics of the Institute of Civil Engineering Lighting Design Standards National Standards Management Group (No. 19, Chegongzhuang Street, Beijing, 100044) for reference in future revisions.
The Ministry of Construction of the People's Republic of China, May 1990, Chapter 1, General Provisions 1.0.1 In order to make the civil architectural lighting design meet the requirements of building functions and protect people's vision and health, it is energy-saving, technologically advanced, economically reasonable, safe to use and maintenance. Convenient, this standard is specially formulated.
Article 1.0.2 This standard applies to the lighting design of public buildings and houses built, rebuilt and expanded.
Article 1.0.3 The design of civil architectural lighting, in addition to complying with this standard, shall also comply with the relevant national standards and norms.
Chapter II Illumination Standards Section 1 General Provisions Article 2.1.1 The illuminance standard values ​​of civil buildings shall be classified according to the following series: 0.5, 1, 2, 3, 5, 10, 15, 20, 30, 50, 75, 100 , 150, 200, 300, 500, 750, 1000, 1500, and 2000 lx.
Article 2.1.2 Illumination standard value refers to the average illuminance value on the reference plane of the work or living place.
Article 2.1.3 specifies three values ​​of high, medium and low illuminance standard values ​​according to different activities or types of work of various buildings. The designer should select the appropriate standard value based on the building grade, functional requirements and conditions of use. In general, the intermediate value should be taken.
Article 2.1.4 In the lighting design, the degree of illuminance should be reduced according to the attenuation of the light source of the light source, the dust of the lamp and the pollution of the room surface, divided by the maintenance factor in Table 2.1.4.
Maintenance factor table 2.1.4 The second illuminance standard value of Article 2.2.1 The illuminance standard value of library building lighting shall comply with the provisions of Table 2.2.1.
Illumination standard value table for library building lighting 2.2.1 Article 2.2.2 The illuminance standard value of office building lighting shall comply with the provisions of Table 2.2.2.
1 
Civil building lighting design standards
Civil Engineering Lighting Design Standard Editor-in-Chief: Approval of the Ministry of Construction of the People's Republic of China for the Ministry of Environmental Protection: Implementation Date of the Ministry of Construction of the People's Republic of China: Notice of the publication of the national standard "Design Standard for Civil Building Lighting" on March 1, 1991 (90) Jianbiaozi No. 248 According to the requirements of the State Planning Commission, [1984] No. 305, the "Design Standard for Civil Building Lighting" jointly formulated by the China Academy of Building Research and the relevant units has been reviewed by the relevant departments. The “Standard for Design of Civil Building Lighting†GBJ133-90 is now approved as a national standard, which will take effect on March 1, 1991.