In order to strengthen the management and monitoring of production sites, public places, key locations, etc., enterprises and governments have built a large-scale video surveillance network, using advanced network monitoring methods to achieve remote management, improve work efficiency, strengthen safety production, and better Maintain public safety order. Network video surveillance can realize remote monitoring and management, but because it is only a one-way point-to-multipoint video transmission, it is powerless for emergency command and coordinated dispatch after an emergency occurs, and emergency command for emergency Scheduling and coordinated work are the most critical places in a monitoring system and the most advanced place in a monitoring system. Video conferencing, as the only system that realizes multi-party video-to-audio "face-to-face" communication, can provide the best and most complete means of communication. It is widely used in conferences, training, collaborative work and other purposes. It is also the best means of emergency command and dispatch. Integrate conferences and surveillance, give full play to the video surveillance capabilities of the surveillance system, and at the same time use video conferencing to strengthen the emergency command capabilities of the video surveillance system, by introducing the monitored video into the video conference, and between the video conference and the surveillance system The interconnection and mutual control will provide a state-of-the-art monitoring and emergency command and dispatch method, which can respond to emergencies at the first time, transfer the scene to the relevant departments and personnel at the first time, and conduct various departments at the first time. Collaborative scheduling among organizations, organize a large range of personnel to cooperate in collaborative work. iFreecomm adopts creative patent technology, based on advanced network video conferencing and network video surveillance technologies and products, it is the first in the industry to launch a new generation of video surveillance and video conference fusion solutions, the world's leading solutions , So that your daily meetings, production scheduling, management and monitoring rose to a new level. CSCT conference and surveillance converged video communication solution networking diagram: The CSCT conference and surveillance fusion video communication solution is based on the fusion of video conference terminals and network monitoring front-end equipment. Through innovative technology, the video conferencing system and network monitoring are realized through the intercommunication of media flow and control signaling between the front-end equipment. Interoperability and mutual control of the system. The program has the following characteristics: Realize the interconnection and mutual control between the video conference terminal and the video surveillance front-end equipment The monitoring front end receives the control of the video conference terminal and the monitoring system platform at the same time. Under the control of the video conference terminal, the monitoring front end transmits the video signal to the video conference terminal; the monitoring front end is equivalent to the video source of the video conference terminal, and the video conference terminal can choose to monitor The front-end camera signal is input and uploaded to the MCU, broadcast to other video conference terminals for viewing, and the video conference terminal can control the camera of the monitoring front end; the monitoring front end also transmits the collected camera signal to the monitoring platform. Based on the communication between the monitoring front-end equipment and the video conference terminal, the video conference system and the monitoring system are relatively independent The intercommunication is only on the terminal side. No modification is needed for the two systems. The two systems are relatively independent while maintaining mutual control. This realizes the organic combination of independent operation of the two systems and good interconnection and mutual control.
Antenk manufactures a wide range of application specific board stacking connectors which were designed and built to specific customer requirements. Our experienced staff has developed custom products in a variety of contact styles, pitches and stacking heights. Our designs range from new concepts to duplicating existing market products identically or with improvements. Many desigsn are produced using automated manufacturing processes to increase reliability and provide significant cost savings
Board to Board Connector
Board-to-board (BTB) connectors as the name indicates is used for connecting circuits board together. This kind of connectors are suitable for stacking circuits boards one over another. Flat flexible cables can be avoided using these kinds of connectors; moreover it makes the entire unit more compact. The commonly used BTB connectors are SMT connectors and Berg Strip. We will discuss about them in detail in the following section.
SMT CONNECTOR
Board-to-board (BTB) connectors are used to connect printed circuit boards (PCB), electronic components that contain a conductive pattern printed on the surface of the insulating base in an accurate and repeatable manner. Each terminal on a BTB connector is connected to a PCB. A BTB connector includes housing and a specific number of terminals. The terminal is made from a conductive material (mostly copper alloy), and plated to improve conductivity and antirust. Terminals transmit the current/signal between PCBs connected by BTB; the housing is made of insulating material (mostly plastic).
The way mount Board to Board Connectors on a PCB
board to board connectors are available in the following pitches: 04mm/0.5mm/0.8mm/1.0mm/1.27mm/2.54mm/3.96mm/4.0mm
0.4mm Board To Board Connectors,0.5mm Female Board To Board Connector,0.8mm 1.0 mmPcb Board To Board Connector,Board To Board Terminal Connectors ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com
Surface Mount Technology (SMT) connector is a commonly found board-to-board connector in advanced circuit boards. As the name indicates this connector is available only in surface mount model. It is carefully mounted on to the solder pads on the surface of the PCB.
SMT connectors are ideal candidate for miniaturization due to their small area of occupancy and stacking height. They are suitable for double layered or multilayered PCBs. They are designed for high performance and reliability.
They commonly found in advanced circuit boards in networking equipment, telephones, mobile phones, computers and other consumer electronics.
The basic types of Board to Board Connector
Broadly speaking, board to board connectors are manufactured in the following types:
Pin Header
Elevated Pin Header
Socket
Elevated Socket
Shrouded Header
Box Header
board to board connectors are available in through hole (TH) and Surface Mount (SMT) variants.
Locating pegs (also referred to as locating posts, alignment pins or board locks) are used to assist alignment of connectors to the PCB. Locating pegs are particularly useful when using surface mount components.
For experienced hardware designers choosing board to board connectors is second nature, for the uninitiated it can be daunting. We offer design support and will help guide you through the options available. If you need help with your board to board connector design, contact antenk. Where required antenk also offer non standard pitches.
