Fluoroplastic Insulation High Temperature Control Cable

Model NO.: cable
Material Shape: Round Wire
Range of Application: Cold-Resistant
Certification: ISO9001
Brand: QIFAN
Trademark: HBSR
Transport Package: 500mcm XLPE Insulated Copper Power Cable Pack
Specification: 0.6/1KV
Origin: Hebei, China
Model NO.: cable
Material Shape: Round Wire
Range of Application: Cold-Resistant
Certification: ISO9001
Brand: QIFAN
Trademark: HBSR
Transport Package: 500mcm XLPE Insulated Copper Power Cable Pack
Specification: 0.6/1KV
Origin: Hebei, China
Description
Scope This product applies to dry AC rated voltage of 450/750V and below the electrical instrument cable and automatic control system transmission line, it is compared with ordinary plastic insulated control cable, insulation using fluorine plastic, the product has higher than the ordinary control cable Heat-resistant grade, with oil, waterproof, wear-resistant, corrosion-resistant gas, anti-aging, non-combustible and other excellent performance, is mainly used in metallurgy, electric power, petrochemical and other industries with mobile temperature and other special occasions. Implementation of the standard Q/321084KLA076 use characteristics 1, AC rated voltage: Uo / U is 450/750V.


Fluoroplastic Insulation High Temperature Control Cable




Executive standard
Q/321084KLA076


Scope of application
This product is suitable for dry AC rated voltage 450/750V and below the electrical instrument cable and automatic control system transmission line, it is compared with the ordinary plastic insulated control cable, the insulation uses fluorine plastic, the product has higher heat resistance than the ordinary control cable Grade, with oil, water, wear, corrosion resistance gas, anti-aging, non-combustible and other excellent properties, mainly applicable to metallurgy, electric power, petrochemical and other industries with mobile temperature and other special occasions.
Fluoroplastic Insulation High Temperature Control Cable


Use characteristics
1. AC rated voltage: Uo/U is 450/750V.
2. The long-term allowable working temperature of the cable conductor is: 200 °C for fluorine plastic, 105 °C for polyvinyl chloride, and 180 °C for silicon rubber.
3, the installation temperature of the cable should not be lower than: PVC sheathed cable 0 °C, silicon rubber sheathed cable -20 °C, fluorine plastic sheathed cable -20 °C.
4, the minimum ambient temperature:
PVC sheathed cable fixed laying -40 °C, non-fixed laying -15 °C,
Silicone rubber sheathed cable fixed laying -60 °C, non-fixed laying -20 °C;
Fluorine plastic sheathed cable fixed laying -60 °C, non-fixed laying -20 °C.
5, cable allow bending radius:
Cables without armouring shall not be less than 6 times the outer diameter of the cable;
Armored cable or cable with copper shield structure shall not be less than 12 times the cable's outer diameter;
The flexible cable with shield structure should not be less than 6 times of the cable outer diameter.



Technical Parameters
Fluoroplastic Insulation High Temperature Control Cable




Factory Show
Fluoroplastic Insulation High Temperature Control Cable


Related Products
Fluoroplastic Insulation High Temperature Control Cable



Packing&Shipping
Fluoroplastic Insulation High Temperature Control Cable

FAQ
Q1 :What kind of company are you?
A1:We are a professional engaged in a variety of power tools research and development, production, sales and construction services as one of the modern high-tech enterprises.

Q2:Can i get free samples?
A2:We could send you the samples ,most samples are free to you,but transport fee should be paid by you.

Q3:How long is your delivery time?
A3: Normally 10-25 days after deposit made.If you are urgent it can be negotiable.

Q4:What's the MOQ?
A4:Different products the MOQ is different.Please contact with our salesman.If we have stocking,we can make for you small quantity.If you need to make customized,the MOQ should be according to our production.
Description
Scope This product applies to dry AC rated voltage of 450/750V and below the electrical instrument cable and automatic control system transmission line, it is compared with ordinary plastic insulated control cable, insulation using fluorine plastic, the product has higher than the ordinary control cable Heat-resistant grade, with oil, waterproof, wear-resistant, corrosion-resistant gas, anti-aging, non-combustible and other excellent performance, is mainly used in metallurgy, electric power, petrochemical and other industries with mobile temperature and other special occasions. Implementation of the standard Q/321084KLA076 use characteristics 1, AC rated voltage: Uo / U is 450/750V.


Fluoroplastic Insulation High Temperature Control Cable




Executive standard
Q/321084KLA076


Scope of application
This product is suitable for dry AC rated voltage 450/750V and below the electrical instrument cable and automatic control system transmission line, it is compared with the ordinary plastic insulated control cable, the insulation uses fluorine plastic, the product has higher heat resistance than the ordinary control cable Grade, with oil, water, wear, corrosion resistance gas, anti-aging, non-combustible and other excellent properties, mainly applicable to metallurgy, electric power, petrochemical and other industries with mobile temperature and other special occasions.
Fluoroplastic Insulation High Temperature Control Cable


Use characteristics
1. AC rated voltage: Uo/U is 450/750V.
2. The long-term allowable working temperature of the cable conductor is: 200 °C for fluorine plastic, 105 °C for polyvinyl chloride, and 180 °C for silicon rubber.
3, the installation temperature of the cable should not be lower than: PVC sheathed cable 0 °C, silicon rubber sheathed cable -20 °C, fluorine plastic sheathed cable -20 °C.
4, the minimum ambient temperature:
PVC sheathed cable fixed laying -40 °C, non-fixed laying -15 °C,
Silicone rubber sheathed cable fixed laying -60 °C, non-fixed laying -20 °C;
Fluorine plastic sheathed cable fixed laying -60 °C, non-fixed laying -20 °C.
5, cable allow bending radius:
Cables without armouring shall not be less than 6 times the outer diameter of the cable;
Armored cable or cable with copper shield structure shall not be less than 12 times the cable's outer diameter;
The flexible cable with shield structure should not be less than 6 times of the cable outer diameter.



Technical Parameters
Fluoroplastic Insulation High Temperature Control Cable




Factory Show
Fluoroplastic Insulation High Temperature Control Cable


Related Products
Fluoroplastic Insulation High Temperature Control Cable



Packing&Shipping
Fluoroplastic Insulation High Temperature Control Cable

FAQ
Q1 :What kind of company are you?
A1:We are a professional engaged in a variety of power tools research and development, production, sales and construction services as one of the modern high-tech enterprises.

Q2:Can i get free samples?
A2:We could send you the samples ,most samples are free to you,but transport fee should be paid by you.

Q3:How long is your delivery time?
A3: Normally 10-25 days after deposit made.If you are urgent it can be negotiable.

Q4:What's the MOQ?
A4:Different products the MOQ is different.Please contact with our salesman.If we have stocking,we can make for you small quantity.If you need to make customized,the MOQ should be according to our production.

Custom Cable Assembly

We provide wire harness manufacturing services for cable harnesses and built-to-print cables used in many industries, such as computer, game machine, POS machine, ATM , audio/video, electro-mechanical, data communications, telecommunications, medical, etc.

Related Products:speaker cable,customized cable assemblies,electrical cable assemblies.

We have developed a tradition of high-tech engineering, prototyping, and quality custom cable manufacturing at very competitive pricing. Also with professional flow chart (wire cutting-stripping-copper twisting-crimping-crimping 100% inspection-soldering-molding-asssembling-testing-FQC100% -OQC1-OQC2) , which can help us support customers with stable quality.


Custom Wire Harness Assembly

  • Electrified dimensional build boards with 100% continuity test
  • Capabilities to test for fuse,diode,resistor, and relay presence
  • Mating test fixtures for lower production wire harnesses
  • Ability to free hand build harnesses for prototypes and design validation
  • Separate layout boards for addition of fir tree clips, rosebuds, clamps,and labels after coverings added
  • Capabilities to add board interlocks and test markings to harness as needed

Speaker Cable,Straight Bnc Cable Assembly,Idc Red Custom Cable Assembly,Customized Cable Assemblies,EV Cable Assemblies,Cable Assembly,Custom Cable,Customized Cable Assemblies

ETOP WIREHARNESS LIMITED , https://www.wireharnessetop.com