With the AD/DA module, the unit number of the module can be up to 95, so it is up to 96 blocks. At the same time, it depends on the maximum number of modules that the CPU is allowed to drive. It can be calculated by combining the power consumption. It can be used by CX-P software. Add the corresponding analog module in the I/O table, and then select a suitable power module in the option/consumption and width. If red appears on the power supply in the consumption and width, the power module is not enough power. You can choose one. Power modules with higher power or reduce the modules on the rack, as follows:
Rotary encoders are used as sensors for angle,position,speed and acceleration. We can offer incremental encoders and absolute encoders.
Absolute Encoder,Custom Encoder On Motor,Custom Optical Encoders,High Resolution Encoder Yuheng Optics Co., Ltd.(Changchun) , https://www.yhenoptics.com
1 Add an analog module to the mainframe
2 Select Consumption and Width in the Options menu.
3 consumption and width, red indicates that the power is not enough, select a suitable power module in the power supply unit
4 Select the appropriate power module: 
