The LED industry continues to face industry elimination competition. Under the rise of the red supply chain, the market is like a catastrophe, and the LED industry's foresight has made industry people worry about the follow-up panel and semiconductor industry. It will face a strong test of the red current, the Chinese government. We are copying the subsidy policy of the LED industry in the year and investing in semiconductors. Not far from Yin Jian, the government must put forward the industrial policy in response to the red supply chain, and lead the industry out of the predicament with the locomotive position, so that it is possible to survive the fierce market competition of this wave; when the peer-to-peer competition peers with government resources to expand overseas, the Taiwanese factory Under the price competition of land factories, they are in trouble. In particular, the industry expects that the general lighting market will be able to survive the bottom of the industry after taking off, but the market has doubled in size in 2015, but the manufacturers have lost money. Li Bingjie, chairman of Jingdian, analyzed that the strength of China's peers is far better than that of Taiwanese companies. The main reason is that the mainland investment market gives LED stocks a high P/E ratio of 30 times or even 60 times, and because of the high P/E ratio and high stock price. The company's market value is higher, and far better than Taiwanese companies. Under the current industry's small month and mergers and acquisitions atmosphere, the mainland's strong market value has become a strong corporate pillar. Li Bingjie said that the high evaluation of the investment market has become a key factor for the mainland to be quite active in this industry merger and acquisition. In addition, behind the government funds to help the mainland group to go abroad; for example, if the land plant is 100 million yuan When a company is acquired, if the stock price is 50 yuan, the market value will increase by 5 billion yuan. For the land factory, mergers and acquisitions become a fairly cost-effective expansion strategy. Wu Jianrong, chairman of Edison, said that mainland manufacturers are far below the Taiwanese factory under the government subsidy, and the mainland enterprises’ financial reports are not as rigorous as the Taiwanese factories. The depreciation and labor costs and government subsidies are unclear. Part of the high gross profit of the company’s earnings in the past few years was due to subsidies, which were arbitrarily bargained on the quotation; the Taiwanese factory did appear to be relatively unfavorable in terms of price. A research consortium Yu Chao pointed out that in 2015, the Chinese government will transfer industrial subsidies to semiconductors, and the LED industry is expected to breathe a little breath, while the upstream chip factory Sanan has received government subsidies of about 10-14% of revenue. In 2015, with the subsidy policy, the revenue ratio fell to 1%, but the land-based enterprises turned to market financing to enrich their working capital. In the past year, the market value has expanded rapidly and a large amount of funds have been raised through the stock market, even though the patent strength is far less than The Taiwanese factory has a long-lasting supply of funds. The strength of the company is relatively strong. In contrast, Taiwanese companies are losing talents, stock prices are falling, and fundraising is not easy. They have to reduce cash outflows through layoffs or unpaid leave.
Electric dc motors were the
first type widely used, since they could be powered from existing
direct-current lighting power distribution systems. A electric Dc Motor's speed can be controlled over a wide range, using either a variable supply
voltage or by changing the strength of current in its field windings. Small electric dc motor are used in tools, toys, and appliances. The universal motor
can operate on direct current but is a lightweight motor used for portable
power tools and appliances. Larger electric dc motor are used
in propulsion of electric vehicles, elevator and hoists, or in drives for steel
rolling mills.
Areas of application: the electric dc motor rotor part of the armature iron core, armature, commutator, such as equipment, electric dc motor is suitable for most electronic products, such as electric screwdriver, laser, smart home, gas valve, etc
Applications:
Method of use: the best stable in
horizontal plane, installed on theelectric dc motor output
shaft parts, cannot use a hammer to knock, knock prone to press into the electric
dc motor drive, may cause damage to internal components, and cannot be
used in the case of blocked.
Operating
temperature range:
Electric dc motor should be used at a temperature of -10~60℃.
The figures stated
in the catalog specifications are based on use at ordinary room
temperature catalog specifications re based on use at ordinary room
temperature (approximately20~25℃.
If a electric dc motor is used outside the prescribed temperature range,the grease on the gearhead
area will become unable to function normally and the motor will become unable
to start.Depending on the temperature conditions ,it may be possible to deal
with them by changing the grease of the motor's parts.Please feel free to
consult with us about this.
Storage
temperature range:
Electric dc motor should be stored ta a temperature of -15~65℃.
In case of storage
outside this range,the grease on the gearhead area will become unable to
function normally and the motor will become unable to start.
Service life:
The longevity of
geared motors is greatly affected by the load conditions , the mode of
operation,the environment of use ,etc.Therefore,it is necessary to check the
conditions under which the product will actually be used .The following
conditions will have a negative effect on longevity.Please consult with us
should any of them apply.
â—Use with a load
that exceeds the rated torque
â—Frequent starting
â—Momentary reversals
of turning direction
â—Impact loads
â—Long-term
continuous operation
â—Forced turning
using the output shaft
â—Use in which the
permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive
,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage
that is nonstandard as regards the rated voltage
â—Use outside the
prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with
us about these or any other conditions of use that may apply,so that we can be
sure that you select the most appropriate model.
when it come to
volume production,we're a major player as well .each month,we rurn out
600000 units,all of which are compliant with the rohs directive.Have any
questions or special needed, please contact us, we have the engineer group and
best sales department to service to you Looking forward to your inquiry. Welcome
to our factory.
Electric Dc Motor,Mini Electric Motor,12V Electric Motor,Electric Motor Gearbox Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com
