According to Forbes, the LED lighting application market will continue to grow in the next five years. Until 2020, the global market share of LED market is expected to reach more than 70%. Because of the rising concept of environmental protection, key cities around the world have successively introduced LEDs to replace traditional public lighting applications. In London, for example, it is announced that by 2016, the street modern lighting improvement plan will be completed, which will introduce 350,000 urban street lights into LED lighting.

The illumination brightness and driving power of the single component of the LED lighting component are greatly improved. Although the lighting effect is improved, the complexity of the driving power supply design is also increased. Generally, the LED driving power module for indoor use has a built-in basic power protection design, which can improve the safety of lighting applications.

Cross-check

Bolt anti-loosening labeling paste provides a more intuitive and simple inspection method for loosening and tampering of bolts and nuts, with simple construction and good fastness.

It can be applied to most places with bolts (such as steam turbine, wind power blade connecting bolts, locomotive bogie and other key connecting bolts, etc.) to provide reliable torque marking scheme.

Before use,clean the surface of bolts and firmware required to be marked to ensure that there is no dust, oil, etc. Apply a continuous label between bolts and firmware until it is naturally cured. Please cover the product immediately after use to prevent the product from curing in the air and affecting the effect of next use.

Our Tamper Proof Torque Marker can be applied to most places with bolts as Torque Seal Marker(such as steam turbine, wind power blade connecting bolts, locomotive bogie and other key connecting bolts, etc.) to provide reliable torque marking scheme.

With the function of cross-check,it has good properties of Viscous coating gummy, slow drying, toluene and xylene free of low odor, easy to apply.

The curing time depends on the thickness of the coating, the dry time of the table is 30-60 minutes, and the dry time is 5-7 days.

Cross-Check,Cross Check Tamper Proof Torque Mark,Torque Seal Marker,Tamper Proof Torque Marker

CAS Applied Chemistry Materials Co.,Ltd. , https://www.casac1997.com