[Photo] High-sensitivity wireless probe

The device introduced in this article can be used to listen to the weak sound indoors or outdoors. As long as a sound detector is installed somewhere, the sound of a place can be clearly heard on the 100M FM radio.
Circuit working principle
The circuit is shown in the figure. It is composed of a highly sensitive microphone amplifier and a wireless transmitting device. The amplifier is composed of two operational amplifiers in a four op amp integrated circuit LM324.
When the electret microphone MIC picks up a weak sound signal, it generates a signal voltage across the MIC, which is coupled to the (3) pin of the first-stage operational amplifier through the capacitor C1 for amplification. Its amplification gain reaches more than 20 dB. After the first-level amplification, it is output from the (1) pin, coupled through the capacitor C3, and the potentiometer RP is controlled to enter the (5) pin for the second-level amplification. After this second-level amplification, it is enough to amplify any weak sound signal to Enough amplitude, then coupled by C5 into the high-frequency transmission circuit.
The high-frequency oscillation circuit is composed of a special high-efficiency transmitting tube V and an LC oscillation circuit. Its resonance frequency is designed in the range of 88 ~ 108MHZ in the FM band. The carrier wave after the audio modulation is transmitted to the surrounding space through the transmitting antenna W, using an FM radio It can be heard outside 100M, where R5 and R7 are the negative feedback resistors of the operational amplifier. Adjusting the resistance can change the amplification gain.
Component selection and debugging
MIC selects miniature electret microphone. It is suitable to add a sound collecting basin on the outside. Put the MIC into a plastic tube with an inner diameter of 25 mm. Paste a layer of fleece on the inner surface of the plastic tube to absorb sound to improve the quality of the sound source. . The launch tube V adopts high-efficiency special launch tube D-50 or D-40, etc., the magnification is greater than 100. L uses enameled wire with a diameter of 0.31 mm to wind 6 turns on a drill with a diameter of 5 mm. After the tire is out of shape, the coil can be elongated to about 5 mm. The antenna can use 40 cm flexible wire.
All the components in the circuit are of good quality, and the welding is correct, you can power on debugging, adjust the potentiometer PR to make the output signal strength of (7) pin moderate, you can use high-impedance headphones to connect between C5 negative and ground to monitor, adjust the L The spacing or the capacity of C is that the transmission frequency falls within the range of 88 ~ 108MHZ, and the distance is adjusted to change the distance. Generally, the sound signal transmitted by the detector can be clearly heard outside 100M.
Note: The connection of the battery and switch S is not marked on the printed circuit board. You can install it according to the connection in the circuit diagram.
â€”â€”Source: Electronic Production World

In-depth analysis of the first-level cache and second-level cache of the technical zone CPU eMMC mass burning dilemma, do you really know? Isolation flyback and non-isolated BUCK application design plan Schottky barrier diode selection and application guide How to use Altium in program design Designer puzzle?
Follow WeChat
Interesting and informative information and technical dry goods
Download Audiophile APP
Create your own personal electronic circle
Follow the audiophile class
Lock the latest course activities and technical live broadcast
Collect People collection
share it:
comment
Publish
related suggestion
[Photo] High-sensitivity wireless sounding device
Posted on 2006-04-15 21:00 â€¢ 576 views
[Photo] Highly sensitive wireless microphone
&
Published on 2006-04-15 20:47 â€¢ 1246 times read
var check_allow = "/d/Api/iscantalk.html"; var add_url = '/ d / article / write /'; function CheckLogin () {now_uid = ''; var ElecfansApi_checklogin = '/ webapi / passport / checklogin'; var logout_url = "{: U ('Login / logout')}"; var logout_url = 'http://bbs.elecfans.com/member.php?mod=logging&action=logout&refer=front'; $ .get (ElecfansApi_checklogin, function (data, textStatus) {if (data! = "") {EchoLoginInfo (data); CheckEmailInfo (data); data = $ .parseJSON (data); now_uid = data.uid; / * var login_content = 'write an article

'+ data.username +'

Quit '; * / var login_content =' write an article

'+ data.username +'

Set exit '; $ (' # login_area '). Html (login_content); var win_width = $ (window) .width (); if (win_width> 1000) {$ ("# mine"). MouseDelay (200) .hover (function () {$ ("# mymenu"). show ();}, function () {$ ("# mymenu"). hide ();});}} else {var content = 'Login Registration'; $ ('# login_area'). html (content); $ (". special-login"). click (function (e) {$ .tActivityLogin (); return false;});}});} $ (function () {// comment ------------------------------- var comment = $ ("# comment"); var comment_input = $ ("# comContent"); // Submit comment click event interaction $ ("# comSubmit2"). on ('click', function () {var content = comment_input.text (); // Empty input box comment_input. html (""). focus (); // Submit data to server $ .ajax ({url: '/plus/arcComment.php', data: {aid: $ ("# webID"). val (), dopost : 'apiPubComment', content: content}, type: 'post', dataType: 'json', success: function (data) {// Data format returned: if (data.status == "successed") {// Build temporary comment DOM var dom = ''; dom + = '

'; dom + =' '; dom + ='

'; dom + ='
'+ data.data.username +' '; dom + ='
'; dom + =' '+ content +' '; dom + =' '; dom + =' just now '; dom + =' '; dom + =' '; // insert a temporary comment to the list $ ("# comment ") .append (dom);} if (data.status ==" failed ") {// alert (data.msg); layer.msg (data.msg);}}}); return false;}); (function () {/ * * Insert single sign-on JS * / var setHost = 'https://passport.elecfans.com'; // Set domain name var script = document.createElement ('script'); script.type = 'text / javascript'; script.src = setHost + '/public/pc/js/t.passport.js'; script.setAttribute ("id", "sso_script"); script.setAttribute ("data-ssoSite", setHost); script.setAttribute ("data-ssoReferer", encodeURIComponent (location.href)); script.setAttribute ("data-ssoSiteid", "11"); var body = document.getElementsByTagName ("body"). item ( 0); body.appendChild (script);}) () / * * It is recommended to modify the style of the article without a picture * * / $ (". Article .thumb"). Each (function () {if ($ (this). find ('img'). attr ('src') == "") {$ (this) .find ('img'). remove (); $ (this) .parent (). css ('padding-left ',' 0px ');}}); / * Baidu share * / window._bd_share_config = {common: {bdText: '', // custom share content bdDesc: '', // Custom share summary bdUrl: window.location.href, // Custom share URL address bdPic: ''} , share: [{"bdSize": 60, "bdCustomStyle": true}]} with (document) 0 [(getElementsByTagName ('head') [0] || body) .appendChild (createElement ('script')). src = 'http://bdimg.share.baidu.com/static/api/js/share.js?cdnversion=' + ~ (-new Date () / 36e5)]; var add_url = '/ d / article / write / '; // var check_allow = "{: U (' Api / iscantalk ')}"; var check_allow = "/ d / api / iscantalk"; var click_items_length = $ ('. art_click_count '). length; if ( click_items_length> 0) {var id_str = ''; $ ('. art_click_count'). each (function () {id_str + = $ (this) .attr ('data-id') + ',';}) // var url = "{: U ('Api / getclickbyids')}"; var url = "/ d / api / getclickbyids"; var id_data = 'id_str =' + id_str; $ .ajax ({url: url, data: id_data, type: 'post', dataType: 'json', success: function (re) {if (re.list.length> = 1) {var list = re.list; for (var i in list) {var t emp_id = list [i] ['id']; var temp_span = $ (". art_click_count [data-id =" + temp_id + "]") temp_span.html (list [i] ['click']);}} }})} $ ("# comContent"). click (function () {if (now_uid == '') {$ .tActivityLogin (); return false;}}) $ (function () {var follow_wrap = $ ( ".author-collect"); var now_uid = "{$ _super ['uid']}"; var face_src = "{$ _super ['uface']}"; var getFollowNum = $ (". followNum strong"). html (); // Follow $ (window) .on ('click', '.author-collect', function () {if (now_uid == '') {$ .tActivityLogin (); return false;} if ( $ (this) .attr ('id') == 'follow') {$ .post ('/ d / user / follow', {tuid: article_user_id}, function (data) {// Data format returned: if (data.status == "successed") {$ (". followNum strong"). html (++ getFollowNum); follow_wrap.html ('followed'). attr ('id', 'cancelFollow'). css ( 'background', '# 999'); var follow_user = ' '; $ (' # follow_list '). append (follow_user);} if (data.status == "failed") {alert (data.msg);}});} else {// Unfollow if ($ ( this) .attr ('id') == 'cancelFollow') {$ .post ('/ d / user / cancelFollow', {tuid: article_user_id}, function (data) {// Data format returned: if (data .status == "successed") {follow_wrap.html ('Follow'). attr ('id', 'follow'). css ('background', '# f90'); $ (". followNum strong"). html (-getFollowNum); $ ('# follow_list .face'). each (function () {var target_uid = $ (this) .attr ('data-uid'); if (target_uid == now_uid) {$ ( this) .remove ();}})} if (data.status == "failed") {alert (data.msg);}}); return false;}}});});}); / * var myface = "{$ _super ['uid'] | avatar}"; var myname = "{$ _super ['username']}"; var article_id = {$ article ['id']}; var article_user_id = {$ article ['mid']}; // Article author ID $ (function () {<notempty name = "clearnum"> // Reduce the number of reminders var count = parseInt ($ ("# noticeCount"). html ()); count = count-{$ clearnum}; $ ("# noticeCount"). html (count); if ( count
Unclassified
Gravity Die Casting Parts,Aluminum Die Casting,Die Casting Auto Parts,Led Housing Aluminum Die-Casting
Yangzhou Huadong Can Illuminations Mould Manufactory Co., Ltd. , https://www.light-reflectors.com