"Technical Regulations for Wind Farm Access to Power Systems" Passes Final Appeal

Shu Yinyu, deputy general manager of the State Grid Corporation of China, disclosed on the 7th that the national standard for wind power grid connection technology, "Technical Regulations for Wind Farm Access to Power System," has passed the final review and has been submitted to the National Standardization Management Committee. At the same time, the industry standard "Large-scale Wind Farm Integration The Design Specification has also been finalized and submitted to the National Energy Administration. He called for the approval of these standards and regulations as soon as possible to promote the safe and reliable operation of wind farms and power grids.

At the State Grid Corporation of China's Strengthening Wind Power Integration Management Symposium held on that day, Shuyin said that an important reason for the frequent occurrence of large-scale wind power off-grid accidents in the first half of this year was the lack of technical standards for wind power grid integration in China and the lag in legislation.

He said that wind power grid-connected technology standards, including wind farm access, grid-connected inspection and dispatch operation, currently only some countries and industry standards are working, and the standard system is still not perfect.

He introduced that in terms of access, the national standard "Technical Regulations on Wind Farm Access to Power Systems" and the industry standard "Technical Specifications for Large Wind Farm Grid Connection Design" have not been approved; the industry standard "Wind Turbine Low Voltage" has been approved for grid connection detection. The traversal capability testing protocol has just completed the draft for comment; in terms of dispatching operations, the industry standard Wind Farm Dispatching Operation Management Specification and Wind Power Forecasting Functional Specification have not yet completed professional review.

As most of China's wind farms are far away from the power load center, large-scale centralized development and long-distance delivery are required. Wind power grid-connected transmission has once become a bottleneck for development. Therefore, the introduction of the national standard for wind farm access to power system technology has attracted much attention in the industry. The core of this standard is the requirement for wind turbines with low voltage ride through technology. At present, only some large-scale wind power equipment manufacturers in China have this technology. The industry believes that the introduction of this standard will raise the threshold of the wind power industry and accelerate the integration of the wind power industry.

The State Grid currently sorts out enterprise standards for dispatching and operation of wind farms and testing standards for wind power grid connection. Shuyin Yin suggested that the National Energy Administration be able to forward these standards so that before the release of relevant national standards, the wind power grid connection work should be carried out in accordance with the standards of the comprehensive technical standards system to ensure the safe and reliable operation of wind farms and power grids.

Compared with the obvious lagging behind in the development of grid-connected technical standards for wind farms in China, foreign countries attach great importance to the management of wind power standards and grid-connected technologies. Shuyin Yin introduced that Germany, Spain, Denmark and other countries with better development of wind power have put forward strict technical requirements for wind power grid connection, and have established strict wind power grid-connected testing systems through legislation to ensure that grid-connected wind power meets technical standards. Denmark's "Renewable Energy Promotion Law" provides detailed regulations on the testing and certification of wind turbines. Only wind turbines that have passed rigorous testing can be connected to the grid.

Low-voltage ride-through is when the voltage of the grid-connected point is caused by a grid fault, the wind turbine does not run off the grid continuously. When the power system fails, it can be cut out from the grid to improve the safety and stability of the grid.

85W Macbook Charger

macbook charger


The 85W Macbook Charger MagSafe 1 or MagSafe 2 Power Adapter features a magnetic DC connector so if someone should trip over it, the cord disconnects harmlessly and your MacBook Pro stays put safely. It also helps prevent fraying or weakening of the cables over time. In addition, the magnetic DC helps guide the plug into the system for a quick and secure connection.

When the connection is secure, an LED located at the head of the DC connector lights up; an amber light lets you know that your notebook is charging, while a green light tells you that you have a full charge. An AC cord is provided with the adapter for maximum cord length, while the AC wall adapter (also provided) gives you an even easier and more compact way to travel.

Designed to be the perfect traveling companion, the adapter has a clever design which allows the DC cable to be wound neatly around itself for easy cable storage.

This power adapter recharges the lithium polymer battery while the system is off, on, or in sleep mode. It also powers the system if you choose to operate without a battery.

Compatible with MacBook Pro with Retina display.

Not sure if this is the right power adapter for your Mac?
See this article for more details about choosing the right one.

Knowing which specific Mac model you have is important.

Please contact with me, that I can tell you about your Mac model and generation will be displayed.

macbook 85w charger,apple macbook 85w charger,85w charger for macbook pro

Shenzhen Waweis Technology Co., Ltd. , https://www.waweisasdapter.com