Antenk DIN41612 Connectors are a versatile two piece PCB connector set with feaures useful for many applications including connections for plug-in card and back-panel wiring, PCB to PCB attachment and peripheral connections for external interfaces. Features include a multitude of body sizes and styles with options that include selective contact loading, make and break contacts, contact lead length choices and contact plating variations each in .100" [2.54mm] or .200" [5.08mm] centerline spacing.
The DIN 41612 standard covers a series of two-piece backplane connectors widely used in rack-based telecommunication, computing, process control, medical, industrial automation, test and measurement and military/aerospace systems where long-term reliability is required. They consist of one to three rows of contacts in combinations of 16, 32, 48, 64, or 96 contacts on a 0.1-inch (2.54 mm) grid pitch. The 3 rows are labelled a, b and c and connectors up to 64 way if using a 96 way body can use either rows a+b or a+c. DIN 41612 Signal connectors can be rated to 1.5 amps per signal pin, at 500 volts, although these figures may be de-rated according to safety requirements or environmental conditions. Several hybrid power and coaxial configurations are available that can handle up to 5.6A or even 15A. This wealth of variations explains the very wide range of applications that they`re put to. For over 30 years these DIN 41612 `Euro Card` connectors to IEC 60603-2 have offered a highly reliable system for board interconnects. Precision contact density, low mating forces, a two piece protective design and many contact termination styles offer unlimited design opportunities. Termination methods include – straight PC, solder eyelet, wire wrap, crimp and [press fit" terminals. Insertion and removal force are controlled, and three durability grades are available. Standardisation of the connectors is a prerequisite for open systems, where users expect components from different suppliers to operate together; ept and Conec DIN 41612 are therefore fully intermateable with all other similarly compliant products from other manufacturers like Harting, Erni, Hirose and TE Connectivity, etc.
DIN 41612 Connectors are widely used in rack-based electrical systems. The standard performance of these connectors is a 2 A per pin current carrying capacity and 500 V working voltage. Both figures may be variable due to safety and environmental conditions.
Types
Features and Benefits of Din41612 Connector:
Uses
Applications of Din41612 Connector:
Din41612 Connectors,Din 41612,Eurocard Connector Din41612,Male Din41612 Connector ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com
The netbook is a notebook computer with a light and low configuration, and has the functions of surfing the Internet, sending and receiving emails, instant messaging, and multimedia playback. Before the advent of the Tablet PC, the Internet was once considered by the industry to be a major impact on the sales of traditional laptops. However, this is not the case in reality, and it is even in a very embarrassing situation.
As a product that has been on the market for many years, the function of the netbook lies between notebooks and tablet PCs. Its consumer groups are mainly those with low requirements for configuration, simple computer applications, and higher requirements for portable performance, especially for students and women. user. However, the tepid market performance of the Internet in these years has revealed that its positioning is unsuccessful.
First of all, from the appearance point of view, there is almost no difference between the netbook and the laptop. The size of the mainstream 10.1-inch netbook is similar to that of a traditional laptop, but it is lighter. This has led to consumers with high mobility requirements preferring to buy laptops in case of lack of functionality at times. Compared with the tablet PC, the latter's touch screen is obviously more in line with the most direct access to knowledge. And with the increasing popularity of tablet PCs, it may be difficult for netbooks to gain the attention of the public. Therefore, netbooks have not benefited from this.
Second, from the hardware configuration point of view, the Internet has a fatal weakness. At present, the main configuration of netbooks at home and abroad is: 10.1-inch screen, 1024x600 resolution, single-core Atom processor. Not to mention that compared with the current mainstream notebook computers (four-core processors, the minimum 1280x800 resolution), even if there is a big gap between the mainstream and tablet computers, the current mainstream tablet computer configuration 10.1-inch screen, dual-core Tegra 2 processor, 1280x800 resolution (iPad 1024x768), and with the development of technology, quad-core tablets have emerged, next year will become the mainstream, larger resolutions will also be used, netbooks will fall into a more unfavorable situation.
A few days ago, a foreign website Blogeee broke news that Samsung will stop producing netbooks and switch to ultra-thin notebooks and tablets. Although Samsung confirmed that the news was not true afterwards, but no wind can not afford to rise, the weather of the Internet market downturn is already very clear. Some industry insiders expect that the Internet will be withdrawn from the stage of history within three years.
In this regard, Acer, the world’s largest netbook maker, has different opinions. In an interview with the media, Acer’s vice president, Lin Xianlang, said that although the growth of netbooks is weak, in some computer emerging markets such as China, India and Indonesia, the market outlook is still bright.
The most common connector in the DIN product line is type C, which is widely used in VMEbus systems, the DIN 41612 standard has been upgraded to meet international standards IEC 60603-2 and EN 60603-2. In the past, ept used a comb supported press-fit tool for their type C and B press-fit female connectors. To be more competitive, ept has changed to flat-rock technology (just a flat piece of steel pushed on the top of the connector) as used by many other manufacturers.
Number of contacts varies
Many variations of housing material, including different types of metal and plastic
Both angled and straight versions
Male and female
C,R,B,Q Type DIN41612 Connectors
Half C, R, B & Q Type DIN41612 Connectors
1/3 C,R, B & Q Type DIN41612 Connectors
H, F, H+F & M type DIN41612 Connectors
IDC Type DIN41612 Connectors
Female Cable Connector
High Pin Count DIN41612 Connectors
Shroud DIN41612 Connectors
• Indirect mating (male/female)
• Automated production processes
• Continuous quality assurance
• 3-160 contacts
• Complete interconnection system
• Numerous interface connectors
• A wide variety of hoods
• Many termination technologies provide for the lowest installed cost
• Contacts selectively gold-plated
• Tinned terminations for increased solderability
The primary use of DIN 41612 connectors are PCB Connectors and motherboards, the main acceptance would be their board to board reliable connections.
Applications
• Data centers
• Storage
• Servers
• Base stations
• Telecommunications equipment
• Backplane and motherboard assemblies
• Switching systems
• Modular rack systems
• Power automation
• Distributed control systems in
industrial control
• Programmable logic controllers (PLC)
• Robotics
• Test and lab equipment
• Energy distribution
• Monitoring equipment
This is not a definitive list of applications for this product. It represents some of the more common uses.