4K resolution is the limit of the human eye can not identify 4K or more screen

With the 2014 CES show just finished, 4K TV will grow faster than expected. Netflix has already planned to launch some online USB streaming video content this year, and Amazon also announced that it will use 4K HD technology to shoot original dramas this year. Obviously, the days when 4K TV became the master of flat-panel televisions are not far away. In today's 8K technology display screen that has not yet been popularized in 4K TVs, it has already been published. Some people may indicate that the 4K or more screens cannot be adapted to human eyes.


At the Consumer Show in Las Vegas, Sharp and Samsung both launched 8K resolution TV prototypes. A considerable number of experts and TV enthusiasts have stated that high resolution is not the only focus of TV display. In order to produce higher quality products, many parameters are often required to interact with each other. Color gamut, brightness, contrast, and more are all very important. If the resolution has reached a level, these parameters tend to be more important than the resolution.

However, to be sure, the display technology will certainly develop to a degree that our naked eye cannot recognize. For example, Apple introduced the revolutionary Retina retina display technology in 2010. At the time, Steve Jobs proposed a realistic standard for retina. He believes that if it exceeds 300 pixels per inch, the viewing distance is normal. It is not enough for the naked eye to distinguish the picture. According to this standard, the vast majority of screen users in 4K resolution cannot be distinguished. It will be the ultimate human eye.

The High-mast Lamp is generally refers to the new lighting device which is composed of the steel taper light pole and the high power combination lamp frame of 15 meters or above.It consists of lamp holder, internal lamp, electric rod body and basic part.Lamp head modelling can according to user requirement, surroundings, lighting need specific and definite;The interior lamps are mainly composed of floodlights and projection lamps. The light source adopts NG400 high pressure sodium lamp, and the lighting radius is 60 meters.The bar body is usually a pyramid structure, which is made of steel plate, with a height of 15 to 40 meters, which consists of two to three sections.

High Mast Light Poleled street light

Material characteristics

1. Beautiful appearance, large lighting area, good lighting effect, concentrated light, uniform illumination, small glare and easy to control and repair.

2. Applicable places: city square, station, wharf, highway, stadium, overpass, etc.

3. The lamp pole is a high quality steel plate by moulding into a multi - pyramid splicing steel rod, through hot galvanizing anti-corrosion treatment.

4. The lamp frame is made of high quality stainless steel.

5.  Fasteners bolts and nuts are stainless steel.

6. Light source:400W-1000W sodium lamp. 

Specifications:

 

Height: from 18m to 50 m

Suit for: highway, expressway, parkway, freeway, central motorway junction, truck and bus terminals, railyards, ship docks, airports, ferry terminals, prisons, industrial and commercial sites, international borders.

Shape: round, multi-pyramidal, column form, polygonal or conical

Material:
    
Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2

Tolerance of  Dimension: ±2%

Lighting Source: 400 W- 5000 W high pressure sodium flood light, light extension :up to 30 000 m²

Light plate: Various figure of selection ,material with hot dip galvanization steel frame

Lifting System: Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute
Equipped e; ant ferromagnetism brake and break -proof device, manual operation applied under power cut

Electric Appliance Control Device: Electric appliance box to be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode

Surface treatment: Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.

Joint of Poles: Insert mode, inner flange mode, face to face joint mode .

Design of pole: Against earthquake of 8 grade

Wind Speed: 80 Km/Hour

Welding: We has past flaw testing. Internal and external double welding makes the welding in shape

Thickness: 6 mm to 20 mm

Production Process:
Raw material test→Cutting→Molding or bending →Welding (longitudinal ) →Dimension verify→Flangewelding→Hole drilling →Calibration →Deburr →Galvanization or powder coating, Painting→Recalibration→Thread→Packaging

Packages: Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required    


 




High-Mast Lamps Series

High-Mast Lamps Series,High Mast Lamps,High Mast Light,High Mast Light Pole

Jiangsu chengxu Electric Group Co., Ltd , https://www.satislighting.com