What kind of Metal Enclosed Switchgear is the medium voltage switch cabinet? It has good insulation performance for other equipment except medium voltage switch. It can avoid electric arc burning through power equipment and ensure the safety of power use. At the same time, it also avoids the expansion of fault range of medium voltage switch when using electricity. The medium voltage switch cabinet is composed of cabinet and circuit breaker, which has the functions of overhead incoming and outgoing lines, cable incoming and outgoing lines, bus connection, etc. The cabinet body is composed of shell, electrical components (including insulating parts), various mechanisms, secondary terminals and wiring. Medium Voltage Motor Drive Solutions 8Pt Low Voltage Switch Cabinets,Low Voltage Switch Cabinet,Electric Motor Switchgear,Innovative Switchgear Solutions Shandong Shunkai electrical equipment co., LTD. , https://www.chinasdsk.com
method one:
1. Insert the Skyworth wireless network card into the USB1 or USB2 port of Skyworth CoolTV.
2. Operate the TV remote control, press the "Cool on/TV" button to enter the Cool open interface, select "Settings" - "Cool open settings", and see the wireless icon on the right has no "X", then the TV has been correctly identified Out of network card.
3. Select “Cool Push Button†in “Cool Settings†and press “OK†on the remote control.
4. Press the WPS (One-Key Encryption) button on the Skyworth 3G router within a 120-second countdown. After this button is pressed, blue light will flash.
5. If the wireless connection is successful, select "Yes".
6. See the obtained IP address. 
Skyworth cool open TV wireless settings UI interface
Method Two:
1. Insert the wireless network card into the TV USB port.
2, through the remote control operation, go to Home> Settings> Network Settings> Wireless Network> Auto Find, and then press "OK" on the remote control to enter the wireless signal search interface, search for the surrounding wireless signal.
3. Select the wireless network that needs to receive the signal and press the "OK" button on the remote control.
4. According to the encryption information of the wireless router, enter the password of the wireless network (set the router's wireless network settings), confirm the password is correct and select "OK".
5, the interface will prompt "Wireless network is connecting", after the wireless network connection is successful, you can see the obtained IP address, subnet mask, default gateway and DNS address and other relevant information on the right side.
6. Return to Kuyinger to watch online movies. If the movie can be played normally, it means that the wireless network has been successfully connected; if there is a smart platform/Android platform TV (such as 42E700S, etc.), you can also enter the smart platform / Android platform> browser Enter the corresponding website, if you can get the corresponding resources, that the wireless network has been successfully connected. 
Obtaining the IP Address Automatically: After performing the above operation, if the wireless router provides the mode of automatically obtaining the IP address, the focus is determined in the automatic acquisition of IP options, and the “OK†key is used to obtain the IP address, when the UI interface is right When the obtained IP address is displayed in the side status bar, it means that CoolTV has already successfully obtained the IP address provided by the wireless router and can access the Internet.
Manually obtain the IP address: If the wireless router provides the mode of manually obtaining the IP address, the operation of the web-cooling TV is: to determine the UI's operation focus in the "manually set IP" option option, and in the "manually set IP" In the secondary menu, enter the IP address, subnet mask, and default gateway information based on the information provided by the router. After the input is completed, press the "OK" button. After the IP address is displayed in the right status bar of the UI, you can access the Internet.
Wifi settings encountered failures and solutions:
1, wireless connection is not on
1) Improve the relative position of wireless routers and wireless network cards.
2) Modify the wireless channel.
3) Whether the TV can recognize the wireless network card.
2, "user name, your mother or verification code is incorrect"
Reset: Use the toothpick or tip of the nose to hold the reset button in the RESET hole for 5-8 seconds. After the router restarts, log in again.
Default username: admin (lowercase), password: (empty)
3, after the correct settings, can not access the Internet
(1) If the IP is 0.0.0.0
1) Confirm that the user name and password are entered correctly.
2) Check if the direct connection Modem can access the Internet.
3) Force WAN rate to 10M.
4) Copy the computer's MAC address.
5) Check if there is a restriction on the router in your city.
(2) If the IP address has obtained IP
1) Manually repair the DNS address.
2) Modify the MTU value.
4, can not enter the WEB configuration interface
(1) Check if the computer is connected to the LAN port and the indicator is normal.
(2) Delete the broadband dial-up connection and cancel the LAN LAN proxy server in IE.
(3) Whether the connected IP address is in the same network segment as the gateway.
(4) Is it possible to ping the gateway address?
1) Can Ping
Clear browser cache files or replace other browsers
2) Unable to Ping
Whether there is a firewall; restart the computer; mandatory network card is 10M/full
(5) Reset
Cool open network TV system WiFi settings [more Raiders explained]
Now more and more people choose to buy online TV, but many users have encountered a problem: how to connect WiFi? Wired connection is very convenient, only need a network cable to solve, but WiFi connection also set. So today, Xiao Bian has taught you how to set up a WiFi network television system.