When talking about the classification of LED backlight classification, we must first understand what LED backlights mean. LED backlight refers to the use of LEDs (light-emitting diodes) as a backlight for the liquid crystal display. Compared with the traditional CCFL (cold cathode tube) backlight, LED has the characteristics of low power consumption, low heat generation, high brightness and long life. It is expected to completely replace the traditional backlight system in recent years. Q: How are LED backlights classified? A: According to the type of LED backlight technology At present, such LED backlight classification can be divided into RGB-LED and white LED. The former utilizes the power of dynamic partition backlight technology and the excellent light source of three-color RGB LED, which has a qualitative leap in color and contrast compared with traditional backlights. Therefore, it is usually applied to high-end TV products, and the general cost is more than 3W yuan. The latter is a relatively common type of LED backlight, which is also widely used in notebooks and liquid crystal displays. White LED backlights usually use light from the edge of the display screen, which is different from the backside of RGB LEDs and traditional backlights. According to the incident position of the LED backlight: The LED backlight module is divided into two types according to the incident position of the light source: the direct type RGB-LED, the direct type white light LED, and the side light type white light LED. The difference between RGB-LED and white LED: The RGB LED color gamut performs slightly better. The disadvantage is that the cost is higher. The price of the finished TV product is still difficult for the average consumer to accept. The white LED light source, although slightly lower in color gamut than the RGB LED, has a relatively high contrast ratio. And the cost of technology is unmatched by RGB-LED. The difference between direct and side-in LED backlights: The LED side light source emits light from both sides of the fuselage, and the light is projected onto the panel through the built-in high transmittance light guide plate. Limiting the thickness of the LCD is the thickness of the fluorescent lamp. The side light source is located at the projection position on both sides, so that it does not occupy the space of the TV thickness. Compared to the side light source, the direct-lit backlight LED can dynamically control the backlight so that when representing images of some dark scenes, it is only necessary to adjust the necessary backlight area (black or darker portions on the screen). Partial lighting, which shows a high-quality image with light and dark contrasts. Objectively speaking, various positions and light sources have technical advantages. Different trade-offs can be achieved through different trade-offs. However, the LED LCD TV is still in the introduction stage, and the direct-lit RGB LED is not well reflected in the cost of the whole machine. Therefore, edge-lit white LEDs are a more reasonable solution at this stage. In addition to Instax Camera Accessories, we also sell Other Accessories: Fijifilm wireless printer crystal case and PU protective case, Instax camera CR2 battery kit (for Instax Mini 25 / Instax 50 / Instax Mini 70 / SP-1, including charger and battery) , IQOS electronic cigarette protection leather case(Long Wallet and Hanging Waist Case). Other Accessories Action Camera Waterproof Shell Case,Camera Wrist Hand Band Mount Strap,Camera Support Accessories,Camera Gopros Accessories GuangZhou CAIUL Digital Products CO,.LTD. , https://www.caiul-instax.com