Modern skhynix emmc 8G industrial grade H26M31001HPR

Industrial Router Crystal 3.2*2.5mm 3225 26M (26.000MHZ) 12PF 10PPM 20PPM 30PPM

Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

Factory direct sales - solid capacitor - patch aluminum electrolysis, to ensure that the factory first-class goods!

The temperature requirements of Dongguan industrial ovens are also very important

Dongguan industrial ovens are used to dry a variety of industrial materials, and are common drying equipment in the industry. Then, when purchasing the Dongguan industrial oven, what are the requirements for temperature? Below, the company will give you a brief introduction.

The choice is 10 degrees higher than the actual use temperature. According to the process requirements, calculate the actual required temperature difference to ensure the baking effect. Example: If the temperature is 150 degrees, 220 degrees, 360 degrees, 440 degrees, do it at a maximum design temperature of 500 degrees. 4 temperatures, if it is the same product. It is best to use a thyristor for control. For the same object, the radiant heat received at 20 cm from the heated wall is only 1/4 of 10 cm from the heated wall. big difference.

Different products, when used at low temperatures, the temperature difference is slightly larger. The actual use of 150 degrees and 220 degrees, no low temperature oven is good. Using a medium temperature 500 degree oven, the 150 degree baking temperature difference is 2 to 5 degrees higher than the low temperature 250 degree oven. Also depends on the quality of the equipment of the manufacturer. Dongguan industrial oven is divided into low temperature (0-250 degrees), medium temperature 250-600 degrees), high temperature (600-1500 degrees) more than 1200 degrees. The company recommends using carbon silicon rod heating, which can be selected according to the process requirements of the product.

When it is newly purchased or used for a long time, it should be baked at a low temperature of 80-100 °C for two hours before starting to raise the temperature to facilitate moisture leakage, enhance insulation performance and extend the life of porcelain. The instrument temperature-controlled thermal element probe should be inserted into the working chamber from the temperature measuring hole on the left line, and should not be inserted from the center hole of the box top valve to avoid affecting the use.