1.0mm (.039") Female Headers
Overview
At one side of this female header is a series of pins which can either be mounted and soldered directly onto the surface of the PCB (SMT) or placed into drilled holes on the PCB (THM).
Soldering SMT female connectors can be done at a maximum peak temperature of 260°C for maximum 60 seconds.
Orientation/Pin-Type: Vertical (Straight) and Right-Angle
Pcb Header,1.0Mm Female Pin Header,1.0Mm Female Header Connector,1.0Mm Pcb Header,0.039" Female Headers,0.039" Pin Header, 1.0mm Female Pin Header SMT, 1.0mm Female Pin Header THT ShenZhen Antenk Electronics Co,Ltd , https://www.pcbsocket.com
It was learned from the Municipal High-tech Zone that in 2009, Binhai High-tech Zone will realize a fixed asset investment of 5 billion yuan, complete the construction of roads, greening, pipelines and other infrastructure within 20 square kilometers, and will activate the comprehensive service center to build the Polong Lake reception center. Construction of white and blue-collar apartments.
According to the plan, Binhai High-tech Zone will complete a fixed asset investment of 5 billion yuan this year, and complete the construction of 20 square kilometers of infrastructure within the scope of CNOOC land. Among them, 27 roads will be built, and the backbone road frame of Binhai High-tech Zone will be initially constructed; 1 million square meters of greening in the completed starting area will be maintained and upgraded, and the newly-built green area will be 1 million square meters; the Polong Lake Reception Center will be completed; the starting area will be completed. Lighting system construction, all adopt LED energy-saving and environmental protection lamps to enhance the night scenery and image of the starting area; accelerate the construction of functional areas such as the new energy industry base and the bio-pharmaceutical industrialization demonstration zone; promote the Tianjin Base of the Fifth Academy of Aerospace, the Municipal Pharmaceutical Research Institute, and Guangdong Ming A number of major projects such as Yangfeng Electric, Blue Collar Apartment and White Collar Apartment were successfully started. The information construction of Binhai High-tech Zone was promoted, a digital service management system was established, and an intelligent service platform was formed. The ecological environment construction was promoted, and building energy-saving technologies and clean energy were vigorously promoted. Energy conservation and emission reduction measures such as applications and renewable energy applications.
It is understood that on the basis of completing the overall planning and control detailed planning of the starting area last year, Binhai High-tech Zone completed the preparation of 6 major categories and 14 special plans for 25 square kilometers, and completed the fixed assets investment for various infrastructure construction projects. With a total of 2.4 billion yuan, 11 trunk roads have been started, and the accumulated road mileage is 34 kilometers, accounting for 72% of the total mileage of all trunk roads. At the same time, the projects of the coastal high-tech zone supporting project sewage treatment plant, the starting area rainwater pumping station, the 110 kV substation, and the Polong Lake reception center have been fully launched.
French lighting engineer to create the Beijing-Hangzhou Grand Canal lighting paintings 2009-02-10
Beijing-Hangzhou Grand Canal Hanging Night Lighting officially lights up (Photos) 2009-02-10
Latest data: December lighting industry production and sales statistics report 2009-02-09
Beijing: CPPCC members call for the promotion of cold light spotlights 2009-02-09
1 
Antenk offers these low profile, easy-install, SMT or THM miniature female connector plugs at high quality and affordable China-quoted price, for board-to-board connection, snuggly fitting the pins of a male header and acting as a receptacle.
Assembly and service is simple with either vertical (straight), elevated or at a right angle configuration/orientation, which can dissipate current of about 1.0 A or less in a tape and reel packaging. The filleted corners can also remove shadowing allowing optimization of LED output.
Also, the 1.0mm pitch female headers are made to work in Arduino boards, Arduino Pro and Arduino Mega with either single or double-row female headers, facilitating connections for programming and incorporation into other circuits. They have the perfect height for clearing the USB-B connector and great for stacking multiple shields.
Female header always called as [Header connector", Antenk provide widely range of header connector, from 2.54mm (.100″ inch) pitch to 1.0mm (.039″ inch) pitch. The number of pins (contacts) is from 2 to 40 pins per orw. There are three type: Straight (Dip Vertical), Right angle, SMT (surface mount).
If you can not find the items you interest from above items, welcome to contact us, and you will always get fully responsive from us.
Applications of 1.0mm Pitch Female Headers
Its small size is most suitable for PCB connections of small equipment and devices such as:
Arduino Boards
Architectural and sign lighting
Retail and display lighting
Fluorescent LED retrofit lighting
Cabinet or furniture lighting
Commercial / residential cove lighting
WiFi equipment
Gaming consoles,
Measurement instruments
Medical Diagnostic and Monitoring equipment
Communications: Telecoms and Datacoms
Industrial and Automotive Control and Test
Mount Type: Through-hole vs Surface Mount
Best used for high-reliability products that require stronger connections between layers.
Aerospace and military products are most likely to require this type of mounting as these products experience extreme accelerations, collisions, or high temperatures.
Useful in test and prototyping applications that sometimes require manual adjustments and replacements.
1.0mm vertical single row female header, 1.0mm vertical dual row female header, 1.0mm Elevated single row female header, 1.0mm Elevated dual row female Header, 1.0mm right-angle single row female header and 1.0mm right-angle dual row female header are some examples of Antenk products with through-hole mount type.
Surface-Mount
The most common electronic hardware requirements are SMT.
Essential in PCB design and manufacturing, having improved the quality and performance of PCBs overall.
Cost of processing and handling is reduced.
SMT components can be mounted on both side of the board.
Ability to fit a high number of small components on a PCB has allowed for much denser, higher performing, and smaller PCBs.
1.0mm Right-angle Dual Row female header, 1.0mm SMT Single row female header, 1.0mm SMT Dual row female header and 1.0mm Elevated Dual Row female Header are Antenk`s SMT female headers.
Soldering Temperature for 1.0mm Pitch Female Headers
1.0mm pitch female headers may be further classified into pin orientation as well, such as vertical or straight male header or right-angle female header.
Vertical or Straight Female Header Orientation
One side of the series of pins is connected to PCB board in which the pins can be at a right-angle to the PCB surface (usually called "straight" or [vertical") or.
Right-Angle Female Header Orientation
Parallel to the board's surface (referred to as "right-angle" pins).
Each of these pin-types have different applications that fit with their specific configuration.
PCB Connector Stacking
Profile Above PCB
This type of configuration is the most common way of connecting board-to-board by a connector. First, the stacking height is calculated from one board to another and measured from the printed circuit board face to its highest insulator point above the PCB.
Elevated Sockets/Female Headers
Elevated Sockets aka Stacked sockets/receptacles or Mezzanine are simply stacked female headers providing an exact distance requirement between PCBs that optimizes electrical reliability and performance between PCB boards.
Choosing this type of stacking configuration promotes the following benefits:
Connector Isolation - the contacts are shrouded preventing cable connection mishaps and good guidance for the mating header connectors.
For off-the-shelf wireless PCB module, stacking height is optimized with elevated sockets.
Offers superior strength and rigidity.
Polarisation prevents users from inverted insertion.
Single, Dual or Multiple Number of Rows
For a 1.0mm straight or vertical female header, the standard number of rows that Antenk offers ranges from 1 to 2 rows. However, customization can be available if 3 ,4 or n number of rows is needed by the customer. Also, the number of contacts for the single row is about 2-40 pins while for dual row, the number contacts may vary from 2-80 pins.
Pin Material
The pins of the connector attached to the board have been designed with copper alloy. With customer`s demand the pins can be made gold plated.
Custom 1.0mm Pitch Female Headers
Customizable 1.0 mm pitch female headers are also available, making your manufacturing process way faster as the pins are already inserted in the headers, insulator height is made at the right size and the accurate pin length you require is followed.
Parts are made using semi-automated manufacturing processes that ensure both precision and delicacy in handling the headers before packaging on tape and reel.
Tape and Reel Packaging for SMT Components
Antenk's SMT headers are offered with customizable mating pin lengths, in which each series has multiple number of of circuits, summing up to a thousand individual part number combinations per connector series.
The tape and reel carrier strip ensures that the headers are packaged within accurately sized cavities for its height, width and depth, securing the headers from the environment and maintaining consistent position during transportation.
Antenk also offer a range of custom Tape and reel carrier strip packaging cavities.